The Z-Wave module can be used to directly control an electrical or water floor heating system, electric water heater, hot water pump, electrical radiator, etc... More information can be found on Qubino.com
The most simplified installationInstallation of the module is carried out in two parts. The first consist of mounting the module inside a mounting box, which is really simple due to the extremely small size and special designed casing (ease of cabling fixing). Proved and tested by professional electricians. Temperature sensor can be installed inside temperature sensor casing (find here more about temperature sensor casings) or according to user needs (inside the tube of the water boiler for temperature sensor, on the water pipe, ...)
Incredible sensor temperature rangeTemperature sensor measures temperature from -50.0°C to +125.0°C, with a 0.1°C resolution.
No batteries required? Connect direct to any heating deviceAs it is connected directly to either 230VAC or 24VDC, no batteries are required.
Hidden thermostat - clean wallsThere is no need to have big room thermostat on the wall, because the temperature set point is set through a Z-Wave network.
Universal Thermostat? even for water boilerThe Z-Wave module can be used to directly control an electrical or water floor heating system, electric water heater, hot water pump, electrical radiator, etc...
- Power supply: 110-230VAC ±10% 50/60Hz, 24-30VDC
- Rated load AC: (resistive load) 2 X 4A / 230VAC
- Rated load DC: (resistive load) 2 X 4A / 30VDC
- Power monitoring accuracy:P = 0-200 W, +/-2 W P > 200 W, +/- 3%
Qubino Flush Heat & Cool Thermostat Extended User Manual/Installation Manual