Adafruit

Panel Mount USB Cable - B Male to B Female

Art.nr: 907
89 Kr
Lagerstatus: 2
Leveranstid: 1-3 Vardagar
Ej betygsatt ännu
This handy USB extension cable will make it easy for you to enclose a device that has a B type port. We think this would be most handy when putting an Arduino in a box.The jack half has two mounting 'ears' with M3 screws installed, 1.1" / 29mm apart.Can...
  • Tipsa
    Tipsa en vän
  • Önska
Dela:

This handy USB extension cable will make it easy for you to enclose a device that has a B type port. We think this would be most handy when putting an Arduino in a box.

The jack half has two mounting 'ears' with M3 screws installed, 1.1" / 29mm apart. Can be used with box walls 0.125" to 0.25" wide. If you have a thinner-walled box, simply swap out the M3 screws for shorter ones. Cable, from connector to connector, is 13" long.

  • Panel mount USB type B socket with USB type B plug at cable end
  • 28 AWG data, 24 AWG power wires
  • Length: 330mm / 13"
  • Two M3 mounting screws, 1.1" / 29mm apart
  • Panel mount end dimensions: 38mm x 14.5mm / 1.5" x 0.57"
Omdömen (0)
Du måste logga in för att kunna skriva omdömen Logga in
  • Inga omdömen har lämnats för denna produkt

    Bli först med att skriva ett!