The Aeotec Door/Window Sensor 7 is a sensor, which detects, if your window is opened, closed or tilted which requires a tilt angle of at least 5°. The sensor is easily retrofittable.
Furthermore, the Aeotec Door/Window Sensor 7 can include other sensors by being connected with other binary sensors like NTC contacts, micro switches or flood sensor. Thanks to its slim design the Aeotec Door/Window Sensor 7 can be installed unflashy on every window. The sensor just has to be installed on the window casement. Additionally, there has to be a slim magnet installed closely to the sensor at the window frame.
With the potential free input the Aeotec Door/Window Sensor 7 can also include other sensors in your Z-Wave system. For that the binary sensor is connected to the potential free input of the sensor. Besides sensors there can also be connected momentary switches, which controls scenes in your gateway. Should your Aeotec Door/Window Sensor 7 fail you once, the core - the circuit board - can be easily replaced without removing the sensor. This allows you to glue the device to the window frame and replace only the circuit board.
Features: Detection of open, closed or tilted thanks to patented sensor technology
Residue-free and simple exchange of the circuit board
Built in tamper protection
Potential free binary input to connect external sensors
Up to 3 years battery lifetime
Tilt angle at least 5°
Z-Wave Smart Start and S2 Security
Wireless technology: Z-Wave Plus
- Article Dimensions (WxHxL) 18 x 70 x 20 mm
- Z-Wave Plus
- Z-Wave S2
- WEEE CE
- IP-Rating IP20
- Spare battery: 1/2AA
|Typ av sensorer:||Dörr/Fönster|