Hoppa till innehåll
Drivdon Z-wave 1 kanal 12 VDC 50W - Dimbar - Constant Voltage

Pris:

SEK 639,00

ÖPPET KÖP 14 DAGAR| SNABBA LEVERANSER | KUNNIG SUPPORT

Drivdon Z-wave 1 kanal 12 VDC 50W - Dimbar - Constant Voltage
  2. Butik
  3. Dimrar
  4. Drivdon Z-wave 1 kanal 12 VDC 50W - Dimbar - Constant Voltage
Standard inkapsling Sensor 1 -55 - +125
Standard inkapsling Sensor 1 -55 - +125
SEK 8,00
SEK 8,00
LED RGB light bulb E27 - Gledopto
LED RGB light bulb E27 - Gledopto
SEK 269,00
SEK 269,00

Drivdon Z-wave 1 kanal 12 VDC 50W - Dimbar - Constant Voltage

https://www.m.nu/web/image/product.template/40790/image_1920?unique=5e2c5cc
• Dimmable Constant Voltage LED driver, Max. output power 50W • 1 channel 12VDC constant voltage output • Class II power supply, fully isolated plastic case • Rubycon capacitors • Built-in active PFC function • High power factor and efficiency, PF > 0.9, Efficiency > 85% • Compliant with Safety Extra Low Voltage standard • Short circuit, over load, over temperature protection • Z-Wave Plus enabled slave controller • Compatible with universal Z-Wave gateway or primary controllers • Smooth and deep dimming to 0.1% without flickering, no buzzing noise • To control constant voltage single color LED lighting • IP20 rating, suitable for indoor LED lighting applications

SEK 639,00
Tidigare SEK Vad är detta? 639.0 SEK

Kontakta oss för mer information.

inkl. moms

Kombinationen existerar inte.

m.nu
SUNRICHER
Kontakta oss
Artikelnummer
 SRP-ZV9105-12-50-CV
Taggar

Villkor och bestämmelser
14 dagars pengarna-tillbaka-garanti
Frakt: 1-3 arbetsdagar

Beskrivning

SRP-ZV9105-50W-CV is a 50W Dimmable Constant Voltage LED Driver with 1 channel 12VDC output. It is designed with 200-240VAC input. Power factor of the driver can be over 0.9 and efficiency is higher than 85%. It enables smooth and deep dimming to 0.1% without flickering and buzzing noise.

The constant voltage driver is designed with Z-Wave Plus control interface which can be included to Z-Wave network and be controlled from your controller or hub interface. The driver can be compatible with universal Z-Wave gateway or primary controller. In addition, the Z-Wave device can bind with Z-Wave remote or wall controllers and be controlled by the them.