PIR (motion) sensor - HC-SR501
Standard/Noname HC-SR501 based PIR sensor.
Adjustable sensitivity approx 3-7m
Adjustable time delay approx 0,5-300 seconds.
Operating voltage range: DC 4.5-20V
Quiescent Current:
Artikelnummer |
HC-SR501 |
Taggar |
Villkor och bestämmelser
14 dagars pengarna-tillbaka-garanti
Frakt: 1-3 arbetsdagar
Beskrivning
Please note: The jumper for setting trigger mode does not always exist. In that case there are solderingpads that can be used instead.
Standard/Noname HC-SR501 based PIR sensor.
Adjustable sensitivity approx 3-7m
Adjustable time delay approx 0,5-300 seconds.
Operating voltage range: DC 4.5-20V
Quiescent Current: <50uA
Level output: High 3.3 V /Low 0V
Detection angel: 100 degree cone.
You can use the following tutorial for reference, but note that the pinout differs!
PIR sensor tutorial page
.
There's an excellent guide on how to easliy connect a PIR sensor to a Raspberry Pi
!
Dimensions:
Length: 24.03mm/0.94in
Width: 32.34mm/1.27in
Screw hole distance: 28mm
Screw hole diameter: 2mm
Height (with lens): 24.66mm/0.97in
Weight: 5.87g/0.2oz
Standard/Noname HC-SR501 based PIR sensor.
Adjustable sensitivity approx 3-7m
Adjustable time delay approx 0,5-300 seconds.
Operating voltage range: DC 4.5-20V
Quiescent Current: <50uA
Level output: High 3.3 V /Low 0V
Detection angel: 100 degree cone.
You can use the following tutorial for reference, but note that the pinout differs!
PIR sensor tutorial page
.
There's an excellent guide on how to easliy connect a PIR sensor to a Raspberry Pi
!
Dimensions:
Length: 24.03mm/0.94in
Width: 32.34mm/1.27in
Screw hole distance: 28mm
Screw hole diameter: 2mm
Height (with lens): 24.66mm/0.97in
Weight: 5.87g/0.2oz