• Stöd för Z-wave plus.
  • Stöd för Z-wave plus.
Thermo Floor

Heatit Z-Water

Art.nr: Z-water
2 495 Kr
Lagerstatus: 1
Leveranstid: 1-3 Vardagar
Ej betygsatt ännu

Heat Z-Water has 10 individual controllable relays and 4 analog inputs. Z-Water has no logic to act as a thermostat - the functionality to control water heating (or similar) must be performed in the Z-Wave controller. 



  • Tipsa
    Tipsa en vän
  • Önska
Dela:
Fibaro HC2/Lite
HA & Domoticz
HomeSeer
Homey
Nexa
Vera
Z-Way
Zipabox
ZNet Lite V1/V2

Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating. Heatit Z-Water is a module that clips right onto a DIN rail to add a variety of functions to your wireless Z-Wave network. Heatit Z-Water is equipped with 10 relay outputs and it has 4 analog/digital inputs. The module can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC or 230V. Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several purposes, e.g. on/off control of light, control of valve actuators for an underfloor heating system, or control of other home automation systems.


Heatit Z-Water analog/digital inputs (different firmware versions) can be configured to work with different functionality and can be connected to potential free contacts, open-collector outputs, and will be able to control other Z-Wave devices; switches, dimmers, etc. Furthermore, the inputs can be used as a Scene Controller and send Central Scene notifications to the Z-Wave gateway. It is possible to configure the level and the indication of the status indicator LED in the front of the Heatit Z-Water module.


  • Rated voltage: 230 V 50/60 Hz
  • Power consumption: 0.6W standby
  • Fuse 3.15A Quick-Acting, UMF 250 Schurter Inc., part no.: 3405.0171.11
    24V DC output: Maximum 1.17A, 28W
    Relay outputs Rated carry current: 5A
    Max. switching voltage: 250V AC, 30V DC
    Max. switching current: 5A
    Max. switching power: 1,250 VA, 150W


  • Inputs
    Max. input voltage: 10V DC
    Input impedance: 10 KO
    Loop output voltage: 5V DC

  • Explorer frame supp. Yes
    Device type Slave with routing capabilities
    Generic device class Binary Switch
    Specific device class Valve Open Close
Z-Wave plus: Ja
Omdömen (0)
Du måste logga in för att kunna skriva omdömen Logga in
  • Inga omdömen har lämnats för denna produkt

    Bli först med att skriva ett!

Varning!
Hemautomation är starkt vanebildande och kan snabbt leda till ett beroende av att automatisera mer och mer.
Läs mer här