Bare Conductive

Touch Board

Art.nr: SKU-5013
449 Kr 759 Kr
Lagerstatus: 5
Leveranstid: 1-3 Vardagar
Ej betygsatt ännu

Design with paintable sensors. Turn touch into sound and make any surface interactive.

  • Tipsa
    Tipsa en vän
  • Önska
Dela:

The Touch Board makes your projects interactive.

One tool, a million possibilities! Create sensors with the Touch Board’s 12 electrodes and trigger sounds through its MP3 player. Make a MIDI piano, an interactive wall, a proximity sensor — you decide. Use our cross-platform installer to add loads of code examples to the Arduino IDE.


Not sure where to get started? Take a look at our Touch Board Starter Kit. It comes with all the materials and ideas you need to get making today!


Works with:

Protoshields, crocodile clips, copper tape, solder and e-textiles. Use with Electric Paint to design your own sensors.


LEVEL: Beginner to Expert Engineer

  • Included:
  • 1 x Touch Board
  • 1 x MicroSD card

  • Height: 2.6cm / 1.2in
  • Width: 13.5cm / 5.3in
  • Depth: 10.8cm / 4.2in
  • Weight: 53g / 1.8oz
  • Country of origin: United Kingdom


Data Sheets:
Electric Paint MSDS
Electric Paint Technical Data Sheet
Electric Paint Application Notes

Resources:
Touch Board Workshop Manual
Touch Board Techniques and Inspiration  
Touch Board Basic Projects
 
Touch Board Digital Toolkit


Technical Details:
• Capacitive touch and distance sensing
• Arduino compatible
• No programming required
• Code and libraries for the Arduino IDE for optional programming
• USB HID compatible
• USB MIDI compatible (example code for Ableton Live)
• USB CDC compatible (example code for Max)
• Preprogrammed as an MP3 Player
• Easy to program as a MIDI instrument or MIDI interface
• HID capable – turn the Touch Board into a keyboard or mouse
• Arduino Leonardo pin layout supporting Arduino shields
• Built in LiPo battery charger
• 3.5mm audio jack
• 20 Digital I/O pins
• 12 Analogue pins
• Atmel ATMega32U4 Microprocessor
• Freescale MPR121 dedicated touch interface
• VLSI VS1053B audio processor
• 32 kB of Flash Memory of which 4 KB is used for bootloader
• 2.5 kB of SRAM
• microSD card included, the Touch Board will work with any microSD card up to 32GB.
• 5V operating voltage

Precautions of use:
Children under 14 years of age must be supervised by an adult whilst using this product. This board may be powered over USB, by an approved 3.7V Lithium Polymer cell or a 3.0~5.5V DC power supply. Observe battery polarity markings carefully before use. Do not use on conductive/met-­-al surfaces as this may short circuit the board and damage it. Bare Conductive takes no for external circuitry connected to this board.
Omdömen (0)
Du måste logga in för att kunna skriva omdömen Logga in
  • Inga omdömen har lämnats för denna produkt

    Bli först med att skriva ett!