-14%
  • Stöd för Z-wave plus.
  • Stöd för Z-wave plus.
  • Stöd för Z-wave plus.
Vision

FYND Motion Detector

Art.nr: FYND VIS_ZP3102-5
559 Kr 479 Kr
Lagerstatus: 1
Leveranstid: 1-3 Vardagar

Kundretur i perfekt skick, dock utan manual. 

Inled alltid inkludering av kundreturer med exkludering. 

The Vision ZP3102-5 Z-Wave Plus motion detector is triggered by movement; allowing it to be used as a security and home automation sensor.

  • Tipsa
    Tipsa en vän
  • Önska
Dela:
The Vision ZP3102-5 Z-Wave Plus motion detector is triggered by movement; allowing it to be used as a security and home automation sensor.

The sensor monitors changes in infrared level and movement that indicate a person's presence. Once detected, the unit sends an alert to up to five associated Z-Wave devices.

The detector also includes a temperature sensor that can be used to monitor the room's temperature or send an alert when the temperature is too low (see note below)./li>

The unit is battery-operated, an alert will be sent to the central controller and the unit's LED will flash when the battery level becomes too low. It also includes a tamper switch that sends an alarm signal if anyone tries to prevent it working.

When used in VERA, the temperature sensor is not available as a separate icon. This means that you must use LUA code to access and use the temperature value.

Manual can be found here
  • Technology: Z-Wave Transmitter (868.42MHz)
  • Z-Wave Groups: One group and five devices (nodes)
  • PIR range: Up to 10m x 100° (at height of 2m)
  • Temperature sensor: -15°C to +40°C
  • Tamper Switch: Yes
  • Push-button: Wake-up, inclusion and exclusion
  • LED: Battery level (low)
  • Power: CR123A 3V Lithium (included)
  • Dimensions (HxWxD): 84 x 62 x 50mm
Z-Wave plus: Ja