pycom - Go Invent

SiPy RCZ1 14dBm - With headers SiPy-RCZ1
359 Kr 459 Kr
Lagerstatus: 19
Leveranstid: 1-3 Vardagar
Ej betygsatt ännu


The SiPy is a triple bearer MicroPython enabled micro controller – perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 chipset the SiPy offers a perfect combination of power, friendliness and flexibility. Create and connect you things everywhere. Fast. Our module is CE, FCC, IC and RCM certified!

  • Tipsa
    Tipsa en vän
  • Önska

The SiPy is a multi-network (Sigfox, WiFi and BLE) development platform. It is programmable with MicroPython and the Pymakr IDE for fast IoT application development, easy programming in-field and extra resilience with network failover. The best blend of speed to deployment and access to new LPWAN networks rolling out across Europe, USA, Africa and India. You can also configure the SiPy in FSK mode to send packets directly from SiPy to SiPy. This way you can create the network configuration of your choice and then use another SiPy as central Nano-Gateway to forward the data to the cloud via WiFi. Our module is CE, FCC, IC and RCM certified!

NOTE: The LoPy4 includes 2-years of Sigfox connectivity.

NOTE: Using the LoRa or Sigfox radio without the external antenna can lead to damage of the device and is therefore not recommended.

If you are purchasing the LoPy4 and wish to connect via USB to your computer, you will also need to purchase either the Expansion Board 2.0, Pysense or Pytrack.


– Powerful CPU, BLE and state of the art WiFi radio. 
– 1KM WiFi range
– MicroPython enabled
– Fits in a standard breadboard (with headers)
– Ultra-low power usage: a fraction compared to other connected micro controllers


– Espressif ESP32 chipset
– Dual processor + WiFi radio System on chip
– Network processor handles the WiFi connectivity and the IPv6 stack
– Main processor is entirely free to run the user application
– An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

Sigfox Operating Frequencies

– RCZ1 – 868MHz (Europe)

Sigfox Specification
– Class 0 device. Maximum Tx power:
+14dBm (Europe)
+20dBm (America)
+20dBm (Australia and New Zealand)

Node range:

Up to 50km – Sigfox certified


– 2 x UART, 2 x SPI, I2C, I2S, micro SD card
– Analog chnnels: 8×12 bit ADCs
– Timers: 4×16 bit with PWM and input capture
– DMA on all peripherals
– GPIO: Up to 24

Security & Certifications

– SSL/TLS support
– WPA Enterprise security
– CE 0700


– RAM: 512kb
– External flash: 4MB
– Hardware floating point acceleration
– Python multi-threading

802.1b/g/n 16mbps

Low energy and classic

Running at 32KHz

– Input: 3.3V – 5.5V
– 3v3 output capable of sourcing up to 400mA
– WiFi: 12mA in active mode, 5uA in standby
– Sigfox (Europe): 12mA in Rx mode, 42mA in Tx mode and 0.5uA in standby

55mm x 20mm x 3.5mm (Without Headers)

– 7g
– 31g (Packaged)

Omdömen (0)
Du måste logga in för att kunna skriva omdömen Logga in
  • Inga omdömen har lämnats för denna produkt

    Bli först med att skriva ett!