Embedded Data Systems

OW-ENV-TH - Temperature - Humidity - without relay

Art.nr: OW-ENV-TH
795 Kr
Lagerstatus: 2
Leveranstid: 1-3 Vardagar
Ej betygsatt ännu
Observera att det i nuläget inte finns någon mjukvara till Windows som stödjer denna enhet!
Mjukvaran OWFS har fullt stöd för enheten.
Nätverksbryggan OW-SERVER har fullt stöd för enheten.

High accuracy ±3% Relative...
  • Tipsa
    Tipsa en vän
  • Önska
Dela:
Observera att det i nuläget inte finns någon mjukvara till Windows som stödjer denna enhet!
Mjukvaran OWFS har fullt stöd för enheten.
Nätverksbryggan OW-SERVER har fullt stöd för enheten.

High accuracy ±3% Relative Humidity.
Uses 1-Wire communication protocol.
Globally unique 64-Bit serial number.
Updates temperature data every 2 seconds.
Updates relative humidity, dew point, humidex, and heat index readings every second.
Supports Conditional Search command, with user-definable conditions.
Uses 1-Wire communication protocol.
Compatible with all EDS and Maxim 1-Wire bus masters.
Pass-through connector for easy daisy-chaining of sensors.
Optional Latching Relay may be controlled independently or change due to alarm status.
LED may be controlled independently or change due to alarm status.
Applications include thermostatic controls, industrial systems, consumer products, thermometers, or any temperature/humidity sensitive system.

The EDS Temperature / Humidity Sensor, OW-ENV-TH, offers an innovative way to easily monitor and control temperature and humidity in indoor environments. The wall mount sensor features high accuracy temperature and humidity sensors; in addition to an LED, conditional search support, and a pass-through 1-Wire connection. Together these features offer an efficient and flexible system for monitoring the temperature, and humidity at one or more locations within a building.

The sensor was specifically designed for easy communications. Any general purpose 1-Wire host adapter* should be capable of reading data from the sensor.
The conditional search support allows the 1-Wire host adapter to quickly identify the alarm status for numerous parameters; and the LED and optional latching relay can be configured to behave in a variety of ways, including:
  • Activate when an alarm parameter is met and deactivate when the alarm byte is cleared
  • Activate when an alarm parameter is met and deactivate when readings return to normal range
  • Controlled independent of alarm status.

The LED and optional relay response times are extremely fast; the sensors are able to respond appropriately (activate fan/alarm siren/etc) even before the monitoring application is aware an alarm has been triggered. Since, the EDS Environmental Sensor line's alarm functions can operate independently of the 1-Wire host adapter the sensor may be used as a standalone Thermostat, Humidistat. Part#s

  • OW-ENV-TH - Temperature/Humidity
  • OW-ENV-THR - Temperature/Humidity/Relay
* Tested models include the HA7Net, OW-SERVER, HA2, HA3, HA4B, HA5, HA7E, HA7S, DS9490R#, DS9097U, and LinkUSB

Parameter Minimum Typical Maximum Units
Operating Temperature Range -40 - 85 °C
Temperature Accuracy -40 to +125°C -1 .25 +1 °C
Temperature Accuracy at 25°C -0.2 - 0.2 °C
Temperature Resolution - 0.0625 - °C
RH Accuracy: 11% RH to 89% RH -3 - +3 % RH
RH Accuracy: 0-10% RH and 90-100% RH  -7 - +7 % RH
Relay Voltage Rating(DC) - 110 - Volts DC
Relay Current Rating(DC) - 2 - Amps DC
Maximum Power Ratings (DC) - - 30 Watts DC
Relay Voltage Rating (AC) - 125 - Volts AC
Relay Current Rating (AC) - 2 - Amps AC
Maximum Power Ratings (AC) - - 62.5 VA
Supply Voltage 4 - 18 Volts DC
Active Current - 7.5 - mA
Enclosure Dimensions (L x W x H) 80 80 21 mm
Omdömen (0)
Du måste logga in för att kunna skriva omdömen Logga in
  • Inga omdömen har lämnats för denna produkt

    Bli först med att skriva ett!