Adafruit

FTDI Serial TTL-232 USB Type C Cable

Art.nr: 4331
339 Kr
Lagerstatus: 2
Leveranstid: 1-3 Vardagar

Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an essential part of any electrical engineer's toolkit.

  • Tipsa
    Tipsa en vän
  • Önska
Dela:

Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an essential part of any electrical engineer's toolkit.

This is a USB C to TTL serial cable with an FTDI FT232R usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels. Useful whenever you want to communicate with a TTL serial device such as an Arduino Pro Mini or ESP breakout, and the pinout will match up exactly to any 'FTDI' 6-pin header.

The version we have is the 5V Power / 3.3V Logic. The data signals are at 3V and the power line provides 5V. We suggest this for any product that needs FTDI cables. Because the cable is 5V-logic compliant, you can use it with 3V or 5V logic just fine - no level shifting required!.

If you have a device that is running at 5V logic and power, this cable will work fine. If you want to tweak the voltages and signals a little, you should also check out the FTDI friend.

  • Cable length: 1 meter
  • 28AWG
  • Pin Wiring:
    • Black - GND
    • Brown - CTS
    • Red - VCC 5V @ 500mA
    • Orange - TXD 3.3V
    • Yellow - RXD 3.3V
    • Green - RTS