Adafruit

Mini Remote Control

Art.nr: 389
59 Kr 79 Kr
Lagerstatus: 7
Leveranstid: 1-3 Vardagar
There's an excellent guide on how to use an IR Remote with a Raspberry Pi Media Center

This little remote control would be handy for controlling a Raspberry Pi, a robot or other project from across the room. It has 21 buttons and a layout...
  • Tipsa
    Tipsa en vän
  • Önska
Dela:
There's an excellent guide on how to use an IR Remote with a Raspberry Pi Media Center

This little remote control would be handy for controlling a Raspberry Pi, a robot or other project from across the room. It has 21 buttons and a layout we thought was handy: directional buttons and number entry buttons. The remote uses the NEC encoding type and sends data codes 0 thru 26 (it skips #3, #7, #11, #15, #19 and #23) to address #0. You can use this to control something that is expecting NEC codes or you can pair this with our IR remote receiver sensor.

We have an Arduino library that, when used with the IR remote receiver sensor will decode button presses.

  • Mini remote control with 21 buttons
  • 38KHz NEC code output, 940nm IR LED
  • 40mm x 86mm x 7mm (3.4" x 1.6" x 0.3")
  • Runs on CR2032 battery, included
Utvalt från fyndhörnan