Funduino Uno R3

Art.nr: funduino_uno
109 Kr
Lagerstatus: 25
Leveranstid: 1-3 Vardagar
OBS detta är en clon/kompatibel version av Arduino UNO R3. Något snävare intervall för matningsspänningen men i övrigt identiskt med orginalet!

Overview The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It...
  • Tipsa
    Tipsa en vän
  • Önska
Dela:

OBS detta är en clon/kompatibel version av Arduino UNO R3. Något snävare intervall för matningsspänningen men i övrigt identiskt med orginalet!

USB-kabel ingår inte, men kan köpas till här


Overview The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.

"Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform.

  • Microcontroller: ATmega328
  • Operating Voltage (logic level): 5V
  • Input Voltage (recommended): 7-12 V
  • Input Voltage (limits): 6-20 V
  • Digital I/O Pins: 14 (of which 6 provide PWM output)
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current per 3.3V Pin: 150 mA
  • Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
  • SRAM: 2 KB (ATmega328)
  • EEPROM: 1 KB (ATmega328)
  • Clock Speed: 16 MHz